Configuration Including Auxiliary Equipment - Mitsubishi Electric MELSERVO MR-J3-xT Instruction Manual

1. FUNCTIONS AND CONFIGURATION

1.7 Configuration including auxiliary equipment

(1) MR-J3-100T or less
(a) For 3-phase or 1-phase 200V to 230VAC
R S T
(Note3)
3-phase or 1-phase
200V to 230VAC
power supply
No-fuse breaker
(NFB) or fuse
Magnetic
contactor
(MC)
Line noise
filter
(FR-BLF01)
L
L
L
(Note2)
Power factor
improving DC
reactor
(FR-BEL)
Regenerative option
Note 1. The battery unit (option) is used for the absolute position detection system in the position control mode.
2. The AC reactor can also be used. In this case, the DC reactor cannot be used.
3. A 1-phase 200V to 230VAC power supply may be used with the servo amplifier of MR-J3-70T or less.
For 1-phase 200V to 230VAC, connect the power supply to L
POINT
Equipment other than the servo amplifier and servo motor are optional or
recommended products.
(Note2)
1
2
3
P
1
P
2
P C
Servo amplifier
U
V
W
L and leave L
1 2
1 - 21
MR Configurator
Personal
computer
(Servo configuration
software)
CN5
CN3
CN1
CN6
CN2
CN4
(Note1)
Battery unit
MR-J3BAT
open.
3
CC-Link
I/O signal
Servo motor