ClearSounds CL600 Installation Manual & User Manual page 13

PROGRAMMING THE RINGER & AUXILIARY ALERT
Ringer Volume:
You can adjust the ringer volume of your CL600 as high as 95+ dB. The ringer volume
adjustment is located on the right side of the telephone. The settings are OFF, LO, HI,
. Your phone comes with the ringer switched to HI. In additional to volume, you
diagram #11)
can adjust the tone or melody of the ring.
: Off,
: Low,
: Hi
Ring Style:
Your CL600 Phone allows you to choose from four different ring tones. You can choose a
new one by changing the settings as follows:
In the hook position
1. Press the MUTE button to access the special features
2. Using the
PHONE>>.
3. Press the OK (green) button.
4. Using the
5. Press OK button.
6. There are four (4) ring tones available. To hear each ring, use the
arrow button to highlight any one of the four and then press the OK button. Do this
with each one to find the best fit for you.
7. To save the ring tone, highlight the ring tone you want, and then press the C button
three (3) times until you are back to the time and date display. Or after your selec-
tion, do nothing for 20 seconds and the ring type will automatically be saved for the
next incoming call.
Strobe & Optional Bed Shaker Ring Signaling:
Your ClearSounds™ CL600 Emergency Connect Telephone incorporates several options
to alert you that the phone is ringing. The loud, adjustable Ringer as well as the bright
Strobe and optional Bed Shaker or any combination of these allow you to customize the
phone to fit your needs.
DIAGRAM #11 – Ringer Volume Switch
or arrow buttons (below the Caller ID Display), highlight <<SET
or arrow buttons, scroll to select <<SET RING>>.
DIAGRAM #12 – Set The Ringer
.
(See diagram #12)
(See
or
13