ClearSounds 40XLC Installation Manual & User Manual page 29

DIM: X------x
This feature allows you to change the number of digits that can be displayed on the screen.
If the DIM:X function is activated, the maximum number of digits that can be shown is 18.
If it is deactivated, the maximum number of digits is 8. It is set to display 18 digits. We
suggest you leave the DIM:X activated as the caller's complete number will not
appear on the screen if it is deactivated.
In the hook position,
1. Press the MUTE button to access the Programming Menu.
2. Using the
3. Press the OK button to confirm.
4. Using the
5. Press the OK button.
6. Using the arrow buttons to select <<ON>> or <<OFF>> to activate or deactivate the
function.
7. Press the OK button to confirm.
8. Press the C button twice to exit.
Setting Up Your Phone Book
Your phone book stores up to 99 names and numbers.
To Add A New Number/Name:
In the hook position,
1. Press the MUTE button to access the Programming Menu.
2. Using the
3. Press the OK button to confirm.
4. Using the
5. Press the OK button.
6. Enter the phone number using the dial pad. To erase the previous digit press the C
button. Include 1 + area code if necessary.
7. Press & Hold the OK button after entering the correct phone number.
8. Enter the Name using the keypad. Press the number with the corresponding letter
on it. Press a number key until the letter you want appears on the screen. For
example, the 2 key represents ABC. For C, you would press the 2 key three (3)
times.
9. After each letter in the name, press the OK button.
10. To backspace, press the C button.
11. After entering the name, press and hold the OK button for 3 seconds to SAVE.
This also takes you to a new entry screen. (You can also pick up the handset or do
nothing for 20 seconds and the information will automatically be saved.)
12. Press the C button once to exit.
or arrow buttons, highlight <<SET PHONE>>.
or arrow buttons, scroll to select <<DIM: X---- x >>.
or arrow buttons, highlight <<PHONE BOOK>>.
or arrow buttons, scroll to select <<ADD>>.
29