ClearSounds 40XLC Installation Manual & User Manual page 27

In the hook position,
1. Press the MUTE button to access the Programming Menu.
2. Using the
3. Press the OK button to confirm.
4. Using the
5. Press the OK button.
6. Using the arrow buttons to select the language you would like to set <<FRENCH>>
(for example)
7. Press the OK button.
8. Press the C button twice to exit.
NOTE: Do not change the language if you can not read it as all of the menu options will
change and it will be very difficult to change to English. If you change to a language you
can't read follow this process 1. Press MUTE 2. Using the
twice and press OK. 3. Tap the arrow down button 3 more times and press OK. 4. You
should see all the languages listed and select English1 then press OK. 5. Press the C
button twice.
Set Area Code / LDS (Long Distance Service) Code
Your ClearSounds 40XLC allows you to dial from your Caller ID memory and your phone-
book. When you use your phone for the first time or if you have moved to a different area
code, you need to enter your area code into the phone. This assures that when dialing a
call out of memory or your phonebook, the number is formatted properly. To set your area
code & LDS Code:
In the hook position,
1. Press the MUTE button to access the Programming Menu.
2. Using the
3. Press the OK button to confirm.
4. Using the
5. Press the OK button.
6. Using the arrow buttons, enter your area code. After each number press the OK but-
ton. The phone accommodates up to six (6) digits (allows for International codes).
Once you have entered your area code, even if you are not using all six (6) digits,
press the OK button until you reach the <<SET LDS CODE>> screen.
The LDS Code is your long distance code. In the U.S. your long distance code is 1. The
phone is pre-set for the U.S. NOTE: Do not change the LDS code unless you are leaving
the U.S.
1. Following step 6 of set area code, using the
Long Distance Code (LDS).
2. Press the OK button to confirm.
3. Press the C button once to exit.
or arrow buttons, highlight/select <<SET PHONE>>.
or arrow buttons to select <<SET LANGUAGE>>.
or arrow buttons, highlight <<SET PHONE>>.
or arrow buttons, scroll to select <<SET AREA & LDS>>.
arrow down button - tap
or arrow button, enter your
27