Current Configuration Commands - Agilent Technologies 34970A Quick Reference Manual

Current Configuration Commands

(see page 224 in the User's Guide)
Valid only on channels 21 and 22 on the 34901A multiplexer module.
CONFigure
:CURRent:DC [{<
[,< resolution >|MIN|MAX|DEF}],] (
CONFigure? [( @ <
[SENSe:]
CURRent:DC:RANGe {<
CURRent:DC:RANGe? [{(
CURRent:DC:RANGe:AUTO {OFF|
CURRent:DC:RANGe:AUTO? [(
[SENSe:]
CURRent:DC:RESolution {<
CURRent:DC:RESolution? [{(
[SENSe:]
CURRent:DC:APERture {<
CURRent:DC:APERture? [{(
[SENSe:]
CURRent:DC:NPLC {0.02|0.2|
CURRent:DC:NPLC? [{(
CONFigure
:CURRent:AC [{<
resolution
[,< >|MIN|MAX|DEF}],] (
CONFigure? [( @ <
[SENSe:]
CURRent:AC:RANGe {<
CURRent:AC:RANGe? [{(
CURRent:AC:RANGe:AUTO {OFF|
CURRent:AC:RANGe:AUTO? [(
[SENSe:]
CURRent:AC:BANDwidth {3|
CURRent:AC:BANDwidth? [{(
This command redefines the scan list when executed.
Default parameters are shown in bold.
range >| AUTO |MIN|MAX|DEF}
ch_list
>)]
range >|MIN|MAX}[,(
@ < ch_list >)|MIN|MAX}]
ON
@ ch_list
<
resolution
ch_list
@ <
time
>|MIN|MAX}[,(
@ < ch_list
1
|2|10|20|100|200|MIN|MAX}[,(
@ < ch_list >)|MIN|MAX}]
range AUTO
>| |MIN|MAX|DEF}
ch_list >)]
range >|MIN|MAX}[,(
ch_list
@ < >)|MIN|MAX}]
ON
@ ch_list
<
20
|200|MIN|MAX}[,(
@ ch_list
<
8
@ < scan_list >)
@ < ch_list >)]
ch_list
}[,( @ < >)]
>)]
>|MIN|MAX}[,( @
>)|MIN|MAX}]
@ ch_list
<
>)|MIN|MAX}]
@ scan_list
< >)
@ < ch_list >)]
}[,( @ < ch_list >)]
>)]
@ <
>)|MIN|MAX}]
< ch_list >)]
>)]
@ ch_list
<
ch_list
>)]
>)]