Agilent Technologies 34970A Quick Reference Manual page 4

Scanning With an External Instrument
(see page 239 in the User's Guide)
ROUTe
@ scan_list
:SCAN ( <
:SCAN?
:SCAN:SIZE?
TRIGger
:SOURce {BUS|IMMediate|EXTernal|
:SOURce?
TRIGger
seconds
:TIMer {<
:TIMer?
TRIGger
count
:COUNt {< >|MIN|MAX|
:COUNt?
ROUTe
:CHANnel:DELay <
:CHANnel:DELay? [(
ROUTe
:CHANnel:ADVance:SOURce {
:CHANnel:ADVance:SOURce?
ROUTe
:CHANnel:FWIRe {OFF|ON}[,(
:CHANnel:FWIRe? [(
INSTrument
:DMM {OFF|ON}
:DMM?
:DMM:INSTalled?
This command redefines the scan list when executed.
This command applies to all channels in the instrument (Global setting).
Default parameters are shown in bold.
>)
MIN
>| |MAX}
INFinity
seconds ch_ list
>[,( @ <
@ < ch_list >)]
EXTernal|BUS|IMMediate}
@ ch_list
<
@ < ch_list >)]
4
TIMer }
}
>)]
>)]