Agilent Technologies 34970A Quick Reference Manual page 3

Scan Configuration Commands
(see page 226 in the User's Guide)
ROUTe
@ scan_list
:SCAN ( <
:SCAN?
:SCAN:SIZE?
TRIGger
IMMediate
:SOURce {BUS|
:SOURce?
TRIGger
seconds
:TIMer {<
:TIMer?
TRIGger
:COUNt {< count >|
:COUNt?
ROUTe
:CHANnel:DELay <
:CHANnel:DELay? [(
:CHANnel:DELay:AUTO {OFF|ON}[,(
:CHANnel:DELay:AUTO? [(
FORMat
:READing:ALARm {
:READing:ALARm?
:READing:CHANnel {
:READing:CHANnel?
:READing:TIME {
:READing:TIME?
:READing:UNIT {
:READing:UNIT?
FORMat
:READing:TIME:TYPE {ABSolute|
:READing:TIME:TYPE?
ABORt
INITiate
READ?
Scan Memory Commands
(see page 235 in the User's Guide)
DATA:POINts?
num_rdgs
DATA:REMove? <
SYSTem:TIME:SCAN?
FETCh?
max_count
R? [< >]
This command redefines the scan list when executed.
This command applies to all channels in the instrument (Global setting).
Default parameters are shown in bold.
>)
|EXTernal|ALARm1|ALARm2|ALARm3|ALARm4|TIMer}
MIN
>| |MAX}
MIN |MAX|INFinity}
seconds @ ch_ list
>[,( <
ch_list
@ < >)]
@ < ch_list
OFF
|ON}
OFF
|ON}
OFF
|ON}
OFF
|ON}
RELative
>
3
>)]
@ < ch_list >)]
>)]
}