Dvi-I Port; Dvi-D Port; Usb 2.0 Port; Usb 3.0 Port - NEC Express5800 Series User Manual

Chapter 1 About US320f

2.2.1 DVI-I port

A monitor conforming to the DVI standard can be connected to the DVI-I port.
An analog monitor can be connected to the DVI-I port by using the supplied DVI-VGA adapter.
Important Do not connect any device other than US320f to the DVI-VGA adapter.

2.2.2 DVI-D port

A monitor conforming to the DVI standard can be connected to the DVI-D port.

2.2.3 USB 2.0 port

Three USB ports are located on US320f to connect peripherals conforming to the USB 2.0 standard (such as keyboard,
mouse, and HDDs) to US320f.

2.2.4 USB 3.0 port

One USB port is located on US320f to connect peripherals conforming to the USB 2.0 standard (such as keyboard, mouse,
USB flash drives and HDDs) to US320f.

2.2.5 LAN connector

Use this connector to connect to the LAN by using a network cable.

2.2.6 Power connector

Use the AC adapter that comes with US320f.
Important Be sure to use the AC adapter and power cord that comes with US320f. Using another adapter or
28
Note The DVI-VGA adapter cannot be connected to the DVI-D port.
Note US320f cannot be woken up from a USB 2.0 port.
 US320f cannot be woken up from a USB 3.0 port.
Note
 The USB 3.0 port on US320f operates in USB 2.0 mode.
Note The Wake-on-LAN feature operates only after Windows is started.
If the DC plug is disconnected from the power connector or the power cord is disconnected from
the outlet, you need to start the OS again.
power cord may cause the system to be damaged even if they seem to be the same as the ones
that come with US320f.
Express5800/US320f User's Guide
2. Names and Functions of Components