NEC Express5800 Series User Manual page 129

Chapter 4 Configuring Client Settings with Atrust Client Setup
Window Settings
Item
Color Depth
Resolution
Multi-Monitor
Display the connection
bar when I use the full
screen
Connection Settings
Item
Printer Mapping
Clipboard Redirection
Smart Card Mapping
Port Mapping
Click the drop-down menu to select the desired color depth for a Remote Desktop session. Four options are
available: 15 Bit, 16 Bit, 24 Bit, and 32 Bit.
NOTE: If RemoteFX is enabled, then no matter which color depth you choose here, 32 bit per pixel will be
applied.
NOTE: You can configure the upper limit of the color depth for a Remote Desktop session on the host
server. In this case, no matter which color depth you choose here, the value cannot exceed the defined
limit.
Click the drop-down menu to select the desired display resolution on a Remote Desktop session. Twelve
options are available: Full Screen, 1920x1200, 1920x1080, 1680x1050, 1400x1050, 1440x900, 1280x1024,
1280x768, 1280x720, 1024x768, 800x600, and 640x480.
Click the drop-down menu to enable/disable multiple displays in a Remote Desktop session.
Click the drop-down menu to select if the Connection bar is displayed or not in full-screen mode.
Click the drop-down menu to enable/disable printer mapping. When Enable is selected, users can access a
local or network printer in a Remote Desktop session.
NOTE: You need to add the desired local or network printer(s) for your thin client first, and then enable this
feature here to use that printer in a Remote Desktop session.
NOTE: To add a local or network printer for your Windows Embedded-based thin client, go to Control
Panel, click Hardware and Sound > Devices and Printers > Add a printer, and then follow the on-screen
instructions to add the desired local or network printer.
Click the drop-down menu to enable/disable Clipboard redirection.
NOTE: When Enable is selected, Clipboard can be used across local and remote desktops (in both
directions).
NOTE: To use a local or network printer in a Remote Desktop session, you need to add the printer to your
thin client, then enable Clipboard Redirection.
NOTE: To add a local or network printer to a Windows 10 IoT based thin client, open Control Panel and
select Hardware and Sound > Devices and Printers > Add Printer, then follow the on-screen instructions.
Click the drop-down menu to enable/disable smart card mapping.
When Enable is selected, users can access smart cards through a smart card reader in a Remote Desktop
session.
Click the drop-down menu to enable/disable port mapping.
When Enable is selected, users can access attached devices using locally available ports, in a Remote
Desktop session.
NOTE: The types and availability of device ports on thin clients may vary, depending on your product
models.
Express5800/US320f User's Guide
5. Configuring Service Access Settings
Description
Description
129