Deploying A System Image Using A Taken Snapshot; Deploying A Snapshot System Image Via Network - NEC Express5800 Series User Manual

Chapter 4 Configuring Client Settings with Atrust Client Setup
2.7

Deploying a System Image Using a Taken Snapshot

Snapshots can be saved on a remote computer via the network or in the USB flash memory. The system image can be
deployed via the network or the USB flash memory depending on where the snapshot is saved.

2.7.1 Deploying a Snapshot System Image via Network

To deploy a system image to US320f by using a snapshot on a remote computer, do the following:
1. On Atrust Client Setup, click System > Firmware Update.
2. Select Snapshot from Firmware Type in the Firmware Update section. A list of snapshots is automatically
downloaded from the remote computer.
3. When download is completed, a message appears notifying you that the snapshot list has been loaded. Click OK.
100
Note Use Atrust Device Manager to manage client snapshots saved on the remote computer. For how to
manage client snapshots on Atrust Device Manager, see Atrust Device Manager User's Guide.
Express5800/US320f User's Guide
2. Configuring System Settings