Running Unified Writer Filter Command Line Options - NEC Express5800 Series User Manual

Chapter 5 Administrative Utilities and Settings
3.1

Running Unified Writer Filter Command Line Options

US320f allows you to enable or disable UWF and change the overlay size using Atrust Client Setup.
If you need to configure UWF in detail, you can use command line options. There are several command line options you
can use to control UWF (command line arguments cannot be combined). For how to configure UWF on Atrust Client Setup,
see Chapter 4, "2.9 Configuring UWF (Unified Write Filter)".
Use the following guidelines for the command line options for UWF. (Click Start > Run, and open the Command Prompt
window by typing "cmd" in the Open box.)
UWFMGR.EXE
Get-Config
Displays the UWF configuration for the current and next sessions.
Filter
Configures general UWF settings.
Enable
Enables UWF in the next session after system restart.
Disable
Disables UWF in the next session after system restart.
Reset-Settings
Restores the original settings captured at installation.
Volume
Configures the settings of the volumes protected by UWF.
Get-Config {<volume> | all}
Displays the exclusion settings for the specified volume or all volumes (if "all" is specified). Information includes
both the current and the next sessions.
Protect {<volume> | all}
Adds the specified volume to the list of volumes protected by UWF. UWF starts protection of the volume after
the next system restart if UWF filtering is enabled.
Unprotect <volume>
Removes the specified volume from the list of volumes protected by UWF. UWF stops protection of volume
after the next system restart.
File
Configures files excluded from UWF.
Get-Exclusions {<volume> | all}
Displays a list of excluded files and directories for the specified volume or all volumes (if "all" is specified).
Information includes both the current and the next sessions.
Add-Exclusion <file>
Adds the specified file to the excluded file list of the volume protected by UWF. The file is no longer subject to
protection by UWF. The exclusion takes effect after the next system restart.
164
If you open the Command Prompt window and enter uwfmgr help or uwfmgr ?, all available
Tip
commands are displayed. For example, for information about the Volume parameter, enter uwfmgr
Volume help or uwfmgr Volume ?.
Express5800/US320f User's Guide
3. Using the Unified Write Filter (UWF)