Texas Instruments LaunchPad AM243 Series User Manual page 8

Board Setup
Table 3-1. Current Sourcing Capability and State of USB Type-C Cable
OUT1
H
H
L
L
The AM243x LaunchPad includes a power solution based on discrete regulators for each of the power rails.
During the initial stage of the power supply, 5 V supplied by the type-C USB connector is used to generate all of
the necessary voltages required by the LaunchPad.
Discrete DC-DC buck regulators and LDOs are used to generate the supplies required for the AM243x system
on a chip (SoC) and other peripherals
Two DC-DC buck regulators (TPS62822) are used to generate the 3.3 V main supply and VDD_CORE_0V85
from the 5 V input supply.
8 AM243x LaunchPad™ Development Kit User's Guide
Figure 3-1. Type-C CC Configuration
OUT2 Advertisement
H Default current in unattached state
L Default current in attached state
H Medium current (1.5A) in attached state
L High current (3.0A) in attached state
Figure 3-2. USB Type-C Power Input
Copyright © 2022 Texas Instruments Incorporated
SPRUJ12B – AUGUST 2021 – REVISED OCTOBER 2022
Submit Document Feedback
www.ti.com