Texas Instruments LaunchPad AM243 Series User Manual page 36

Hardware Description
4.10 Industrial Application LEDs
The Industrial application LEDs consist of five green, one red, and two bi-color LEDs.
• Four green LEDs are connected to the I2C-based LED driver (TPIC2810D) at the address 0x60 that
is controlled by the SoC at the SoC_I2C0 port. These LEDs are to be toggled based on the Industrial
application.
• The other green LED, as well as the red and two bi-color LEDs, are connected to SoC GPIO's such that they
can be toggled based on the application.
36 AM243x LaunchPad™ Development Kit User's Guide
Figure 4-15. Industrial Application LEDs
Copyright © 2022 Texas Instruments Incorporated
SPRUJ12B – AUGUST 2021 – REVISED OCTOBER 2022
Submit Document Feedback
www.ti.com