4.2.2. Tightening torque
The table below gives the average tightening torques required regarding the fixing
screw diameter. These values are valid for both motor's feet and flange bolting.
Screw diameter
M2 x 0.35
M2.5 x 0.4
M3 x 0.5
M3.5 x 0.6
M4 x 0.7
M5 x 0.8
M6 x1
M7 x 1
M8 x 1.25
Warning: After 15 days, check all tightening torques on all screw and
nuts.
Tightening torque
0.35 N.m
0.6 N.m
1.1 N.m
1.7 N.m
2.5 N.m
5 N.m
8.5 N.m
14 N.m
20 N.m
81 - PVD 3664_GB_NK-November 2016.Docx
Screw diameter
M9 x 1.25
M10 x 1.5
M11 x 1.5
M12 x 1.75
M14 x 2
M16 x 2
M18 x 2.5
M20 x 2.5
M22 x 2.5
M24 x 3
Tightening torque
31 N.m
40 N.m
56 N.m
70 N.m
111 N.m
167 N.m
228 N.m
329 N.m
437 N.m
564 N.m