Parameter Channel; Used Area; Procedure For Reading The Value Of Actual Torque [683.1] - Parker Compax3S025V2 Manual

4.5 Parameter channel

The plc (HMI) is asking for the value of actual torque [683.1]
Also the value of stiffness [2100.2] should be chanced. The procedure is explained with
help of SIMATIC Variable table.

4.5.1 Used area

DBW28 nCmd
DBW30 nPNUIndex
DBW32 nPNUSubindex
DBD34 iParameterValue

4.5.2 procedure for reading the value of actual torque [683.1]

1. look for "status of actual current value" in the Table „Object overview sorted by
object name"
pic 3
2. Open Object description:
Klaus Zimmer
Parker Hannifin GmbH & Co KG
EME - Electromechanical Automation Europe
Postfach 17 20 * 77607 Offenburg
Robert-Bosch-Straße 22 * 77656 Offenburg
E-Mail: klaus_zimmer@parker.com
Electromechanical Automation
Product Management & Application
FB45
C3 I20 T11 ControlManager application note eng.doc
Seite 16 von 20
Version: 16
bTransErr
iParameterValue
11.02.2008
DBX3.1
DBD34