Table of Contents
Advertisement
4. COMMISSIONING, USE AND MAINTENANCE
4.1. Instructions for commissioning, use and maintenance
4.1.1.
Equipment delivery
All servomotors are strictly controlled during manufacturing, before shipping.
While receiving it, it is necessary to verify motor condition and if it has not been
damaged in transit. Remove it carefully from its packaging. Verify that the data
written on the label are the same as the ones on the acknowledgement of order, and
that all documents or needed accessories for user are present in the packaging.
Warning: In case of damaged material during the transport, the
recipient must immediately make reservations to the carrier through
a registered mail within 24 h..
4.1.2.
Handling
Kit motors are delivered in two part, rotor and stator divided.
DANGER: Do not handle the stator with the help of electrical cables
or use any other inappropriate method. Use non-magnetic material
to handle rotor.
4.1.3.
Storage
Before being mounted, the motor has to be stored in a dry place, without rapid or
important temperature variations in order to avoid condensation.
During storage, the ambient temperature must be kept between -20 and +60°C.
If the torque motor has to be stored for a long time, verify that the rotor and stator are
coated with corrosion proof product.
78 - PVD 3664_GB_NK-November 2016.Docx
Advertisement
Table of Contents
