Table of Contents
Advertisement
The options for X86DNLD are listed in
The following example shows a sample command:
PCIHA001
Table 9: DOS Diagnostic Utility Command Options
Infilename
Outfilename
Note:
a comment line. Data entered by the user appears on a line by itself, not preceded
by a #.
Using the DOS Diagnostic Utility for Preliminary Testing
The diagnostic program performs preliminary analysis of the HBA before
displaying the main menu. If no HBA is found, the program exits. Error messages
are displayed on failure conditions.
During startup, the diagnostic and firmware download utility program:
1. Looks for installed PCI HBAs.
2. Executes preliminary testing on all installed HBAs. Tests include:
3. Reports pass or fail status messages.
4. Resets the HBAs.
5. Checks Power-On Self Test (POST) status of HBAs.
6. Reports revision levels of diagnostic and functional firmware.
7. Displays the resources of each HBA.
Host Bus Adapter for Windows and Linux Installation Guide
A:\X86DNLD.EXE {I = infilename} {o = outfilename}
C:\ X86DNLD.EXE o = PCIHA001
is the output filename.
Option
Script input file that is read and executed by the program.
Creates a file of keystrokes that is stored for later use (for example,
as an input file).
All message lines except user input begin with a number symbol (#) to indicate
a. SLIM memory test
b. BIU register test
c. BIU configuration registers test
Diagnostic and Configuration Utilities
Table
9. The syntax for using options is:
Description
67
Advertisement
Table of Contents
