General Information; Scope - Garmin GDL 90 UAT Upgrade Instructions

1 G I
ENERAL NFORMATION
1.1 S
COPE
This manual contains the instructions for upgrading existing Capstone UAT to the GDL 90 Data link
Sensor. It is intended for use by persons certified by the Federal Aviation Administration (FAA) to install
avionics devices.
This document is to be used as a supplement to the GDL 90 Installation Manual, Part No 560-1049-xx,
which is included in the GDL 90 Product CD. The information in this manual is STC approved. Only
the equipment interfaces covered in this manual are within the scope of this STC. Refer to the GDL 90
Installation Manual for more descriptions on interfaces.
Since the upgrade installation is different from the standard installation in mounting tray
and hardware, this manual should be used to install the GDL 90 in existing Capstone
installations and the GDL 90 Installation Manual should be used for certification
limitation, product specifications, system checkout, troubleshooting and maintenance
procedures.
GDL 90 Capstone Upgrade Instructions
NOTE
560-1057-00 Rev A

General Information

1-1