Advertisement
Description of the item on screen follows:
Spread Spectrum
This item allows you to select the clock generator Spread Spectrum
function. When overclocking the processor, always set this item to Disa-
bled. The defualt setting is Enabled.
Stop Un-Used PCI Clock
This item allows the clock generator to auto-detect the interface of
DIMM/PCI. If there's no PCI card present, then the clock will be shutdown.
The default setting is Enabled.
CPU Frequency Selection
Before setting this item, check the mainboard clock generator first.
This mainboard comes with two kind of clock generator: ICS9248-64 and
ICS9248-110. ICS9248-64 CPU Frquencies are: 100,120,133. ICS9248-110
CPU Frequencies are: 90, 95, 100~125, 133, 140, 150.. Check your processor
and set this function. If you set this to Manual, you can set the CPU
Frequency accordingly.
CPU Voltage Selection
Check your processor and set this function accordingly. If you set
this to Manual, you can set the CPU voltage accordingly.
CPU voltage are: 1.40, 1.45, 1.50, 1.55, 1.60, 1.65, 1.70, 1.75.
Chassis Intrusion Detect
Set this option to Enabled, Reset, or Disabled the chassis intrusion
detector. During Enabled, any intrusion on the system chassis will be
recorded. The next time you turn on the system, it will show a warning
message. To be able to clear those warning, choose Reset. After clearing
the message it will go back to Enabled.
®
3-24
Advertisement
