Advertisement
Serial PortB Mode/IrDA Protocol/Ir I/O pin Select
This items allows the user to determine which InfraRed (IR) function
of the onboard I/O chip.
Onboard Parallel Port
Choose Auto, the BIOS automatically assigned onboard parallel port
to the available parallel port or disabled.
If the ISA add-on card has
LPT1
I/O:378H
I/O:278H
X
X
X
X
Note: If the onboard parallel port interrupt and ISA add-on card interrupt are
in conflict, the parallel port will not work properly. Please disable one of
the devices.
Parallel Port Mode
This option allows user to choose the operating mode of the onbaord
parallel port. The settings are Normal, SPP/EPP or ECP mode.
EPP Version
This option is for setting which EPP version will be used. The settings
are 1.7 and 1.9.
LPT2
LPT3
I/O:3BCH
X
X
X
X
X
X
X
X
®
Onboard parallel port to be set as
PORT
ASSIGNED
Disabled
LPT3
LPT2
LPT1
LPT2
LPT1
LPT1
LPT1
3-21
IRQ
ASSIGNED
X
5
5
7
5
7
7
7
Advertisement
