Advertisement
Parallel Port IRQ
If the onboard parallel mode is not on auto mode, the user can select
the interrupt line for onboard parallel port. We suggest that the user select
the interrupt for the onboard parallel port as shown below:
Onboard parallel port set at
LPT1(378H)
LPT2(278H)
LPT3(3BCH)
Parallel Port DMA Channel
This option allows user to choose DMA channel 1 to 3 for the
onboard parallel port on ECP mode.
Onboard IDE
Set this option to enable or disable on board IDE controller.
Onboard Sound
This item allows you to enable/disable the onboard Aureal audio
chipset. The settings are Enabled, Disabled.
®
Parallel Port IRQ
7
5
5
3-22
Advertisement
