Advertisement
DMA Channel 0/1/3/5/6/7
These options specify the bus that the specified DMA channel is
used. These options allow you to reserve DMAs for legacy ISA adapter
cards.
These options determine if AMI
the available DMAs passed to devices that are configurable by the system
BIOS. The available DMA pool is determined by reading the ESCD
NVRAM. If more DMAs must be removed from the pool, the end user can
use these options to reserve the DMA by assigning an ISA/EISA setting to
it.
IRQ3/IRQ4/IRQ5/RQ7/IRQ9/IRQ10/IRQ11/IRQ14/IRQ15
These options specify the bus that the specified IRQ line is used on.
These options allow you to reserve IRQs for legacy ISA adapter cards.
These options determine if AMI
the pool of available IRQs passed to devices that are configurable by the
system BIOS. The available IRQ pool is determined by reading the ESCD
NVRAM. If more IRQs must be removed from the pool, the end user can use
these options to reserve the IRQ by assigning an ISA/EISA setting to it.
Onboard I/O is configured by AMI
are configured as PCI/PnP. If all IRQs are set to ISA/EISA and IRQ14 and 15
are allocated to the onboard PCI IDE, IRQ9 will still be available for PCI and
PnP devices, because at least one IRQ must be available for PCI and PnP
devices. The settings are ISA/EISA or PCI/PnP. The Optimal and Fail-Safe
default settings are PCI/PnP.
Reserved Memory Size
This option allows the user to reserved the memory size for old add-
on card. The settings are 16k/23k/64k/Disabled.
Reserved Memory Address
This option allows the user to reserved the memory size of the old
add-on card in the reserved memory address. The default setting is C8000.
®
®
BIOS should remove a DMA from
®
BIOS should remove an IRQ from
®
BIOS. All IRQs used by onboard I/O
3-18
Advertisement
