Advertisement
Suspend Time Out (Minute)
This option specifies the length of a period of system inactivity while
in Suspend state. When this length of time expires, the computer enters
Suspend power state. The settings are Disabled, 1 min, 2 min, 4 min, 8 min,
10 min, 20 min, 30 min, 40 min, 50 min or 60 min. The Optimal and Fail-Safe
default settings are Disabled.
Modem Use IO Port
This indicates which I/O port will be used by the Modem (if there is a
modem installed)
Modem Use IRQ
This indicates which IRQ number will be used by the Modem (if there
is a modem installed).
Power Button Function
During Suspend, if you push the switch once, the system goes into
suspend mode and if you push it more than 4 seconds, the system will be
turned off. During On/Off, the system will turn off once you push the
switch.
Green PC LED Status
This item determines which state the Power LED will use. The
settings are Blinking, Dual, and Single. During blinking, the power LED will
blink when the system enters the suspend mode. When the mode is in Dual,
the power LED will change its color. Choose the single and the power LED
will always remain lit.
Restore on AC/Power Loss
The settings are power on, power off or last state. During power on,
after every AC power loss, the system will be turned on. During last status,
after every AC power losss, whatever the system status, it will be the same
when the AC power returns.
®
3-14
Advertisement
