16.2
Electromagnetic compatibility
Definition
Electromagnetic compatibility (EMC) is the ability of an electrical installation to function
satisfactorily in its electromagnetic environment without interfering with that environment.
Among other things, the S7-1500 automation system also meets the requirements of the
EMC legislation for the European single market. The prerequisite for this is that the S7-1500
system complies with the requirements and guidelines relating to electrical equipment.
EMC in accordance with NE21
The S7-1500 automation system meets the EMC specifications of the NAMUR guideline
NE21.
Pulse-shaped disturbances
The following table shows the electromagnetic compatibility of the S7-1500 automation
system with regard to pulse-shaped disturbances.
Table 16- 2
Pulse-shaped disturbance
Electrostatic discharge in accordance
with IEC 61000-4-2.
Burst pulses (high-speed transient
disturbances) in accordance with
IEC 61000-4-4.
High-energy single pulse (surge) in accordance with IEC 61000-4-5
External protective circuit required (not for 230 V modules)
(see the Defining interference-free controllers
(http://support.automation.siemens.com/WW/view/en/59193566) Function Manual)
•
•
S7-1500 Automation System
System Manual, 02/2014, A5E03461182-AB
Pulse-shaped disturbances
asymmetric coupling
symmetric coupling
16.2 Electromagnetic compatibility
Test voltage
Air discharge: ±8 kV
Contact discharge: ±6 kV
±2 kV (power supply lines)
±2 kV (signal lines > 30 m)
±1 kV (signal lines < 30 m)
±2 kV (power supply lines)
DC with protective elements
±2 kV (signal/data line only > 30 m), with
protective elements
±1 kV (power supply lines) DC with
protective elements
±1 kV (signal/data line only > 30 m), with
protective elements
Technical specifications
corresponds
with degree of
severity
3
3
3
3
3
187