FujiFilm Revoria Press E1136 Quick User Manual page 36

MAINTENANCE
Clearing Paper Jams
Paper Jams in Transfer Module (Front Cover Areas)
WARNING! The machine parts are very hot to touch and remove. Never touch a labeled area
indicating 'High Temperature'
1
1. Ensure machine is idle. Gently open front cover.
2. Turn handle 2 to the right until it is in the horizontal position, and then pull out the Transfer
Module.
3. Lift up lever 2b to remove jammed paper, then turn knob 2a to remove jammed paper.
4
4. If paper jammed at top of Transfer Module/ inside Fuser Unit, remove paper by pulling it out
toward the left. If the paper cannot be removed, lift the lever 2c and then try removing the paper
jam.
5. Shift lever 3b on the right of Fuser Unit as necessary and remove jammed paper. If jammed
paper remains inside and difficult to remove, pull out Duplex Module after returning the Transfer
Module to the original position, and then try again.
6. Lower the handle under the Centre of Transfer Module to remove jammed paper. After remove
jammed paper, insert Transfer Module, turn the handle 2 to the left and close the Front Cover.
36
and 'Caution' to avoid burns.
2
5
3
6