Chapter 5. Operation; Programming Numbers Into Memory; Making Phone Calls; Dialing On The Keypad - Clarity RC200 Operating Instructions Manual

a
CHAPTER 5
OPERATION
For optimum communication clarity, speak
into the RC as close as possible, not to
exceed 15 feet away. Keep the microphone
free from obstructions. Do not speak at the
same time as the other person. Also, adjust
the volume control and set the ring volume to
best suit your hearing needs.
A. Programming numbers into memory
Your RC can store up to 20 numbers (two
numbers per button) in its memory for fast,
one–touch dialing.When programming, pressing
the FLASH/PAUSE button between numbers
inserts a 2 second pause in dialing.
To program a number into memory:
1. Press PROGRAM.
VOL MUTE
PR O G
SCAN HEADSET
MIC
Figure 9
2. Dial the number (up to 40 digits).
M9
M10
VOL MUTE FLASH/PAUSE
ON/OFF
PROG SCAN HEADSET REDIAL
MIC
Figure 10
3. Select the memory button to store this
number, press once for first location,
or twice for second location.When the
number is programmed, it emits four
"beeps" to confirm the number is stored.
4. If you make a mistake or want to
change the number, repeat from step 1.
5. To erase a number, press PROGRAM,
then FLASH/PAUSE, and then the
corresponding memory location.
6
B. Making phone calls

Dialing on the keypad

1. Press ON/OFF button
and listen for dial tone.
2. Dial the number on the
keypad. (If no number
is dialed within 7
seconds, DIALOGUE
RC automatically
dials the first number
stored in memory
location M1.)
3. When finished, press the ON/OFF
button to hang up.

Memory dialing from console

1. For the first number
stored in each memory
button, press the
memory button once.
For the second number,
press the memory button twice.The
indicator light on the directory shows
the memory selected.
The number is dialed after a 3 second
2. wait, allowing you time to change your
selection.
3. When finished,
press the ON/OFF
button to hang up.
MUTE FLASH/PAUSE
ON/OFF
HEADSET REDIAL
MIC
Figure 11
M9
M10
VOL MUTE FLASH/PAUSE
ON/OFF
PROG SCAN HEADSET REDIAL
MIC
Figure 12
M8
M9
M10
VOL MUTE FLASH/PAUSE
ON/OFF
PROG SCAN HEADSET REDIAL
MIC
Figure 13
MUTE FLASH/PAUSE
ON/OFF
HEADSET REDIAL
MIC
Figure 14