Safety; Suspension - Electro-Voice Tour X Series User Manual

4 en | Safety
1

Safety

1.
2.
3.
4.
5.
6.
1.1

Suspension

The Electro-Voice TX1122 , TX1152 , and TX2152 have threaded points that can be used for
suspension. Please refer to ... on properly suspending Tour X models prior to installation.
Warning!
Suspending any object is potentially dangerous and should only be attempted by individuals
who have a thorough knowledge of the techniques and regulations of suspending objects
overhead. Electro-Voice strongly recommends that loudspeakers be suspended taking into
account all current national, federal, state, and local laws and regulations. It is the
responsibility of the installer to ensure all loudspeakers are safely installed in accordance
!
with all such requirements. When loudspeakers are suspended, Electro-Voice strongly
recommends the system be inspected at least once per year or as laws and regulations
require. If any sign of weakness or damage is detected, remedial action should be taken
immediately. The user is responsible for making sure the wall, ceiling, or structure is capable
of supporting all objects suspended overhead. Any hardware used to suspend a loudspeaker
not associated with Electro-Voice is the responsibility of others.
Stand mount
The Electro-Voice TX1122 and TX1152 include 1-3/8-inch stand mounts for use with tripod
stands.
1.
2.
3.
4.
5.
6.
7.
Ground stack
The Electro-Voice TX2152 can be vertically stacked on a TX2181 to elevate the horn above the
audience.
1.
2.
3.
03-2022 | 08 | F.01U.196.114
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water other than explicitly called out in this manual.
Clean only with a dry cloth.
Check the specifications of the speaker stand to be certain it is capable of supporting the
weight of the speaker.
Place the speaker stand on a flat, stable surface and be sure to fully extend the legs of
the stand.
Do not try to make the stand "taller" and compromise its structural integrity.
Do not attempt to suspend more than one speaker on a stand designed for a single
speaker.
Unless you are confident that you can safely handle lifting the weight of the speaker onto
the stand, ask another person to help you place it.
Route cables and position the stand so that performers, production crew and audience
members will not trip over the stand or cables and pull the speaker system over.
Secure the cables with wire ties or tape whenever possible.
Unless you can safely lift the weight of the loudspeaker on to the ground stack, have
another person to help you place it.
The ground stack should be placed on a solid, level surface.
When using subs on a surface that is hard or slick, take precautions to prevent the stacks
from "walking".
User manual
Tour X Series Loudspeakers
Electro-Voice