Electro-Voice TX1122FM Specification Sheet

Key Features:

• DH3 1.25" (32mm) Diaphragm, 1" (25mm) Exit
Pure Titanium Compression Driver
• SMX2120 12" (305mm) LF Transducer with
Fully Symmetric Drive
• Advanced 4 Order Crossover with HF
th
Protection
• 90° x 50° Coverage Pattern
• 97 dB Sensitivity, 130 dB Maximum SPL
• 500W Continuous (2000W Peak) Power
Handling
• Pole Mount for Tripod Use
• (6) 3/8" Threaded Points for Suspension
General Description:
The Electro-Voice® TX1122 is a high power, 2-way loudspeaker sys-
tem that can be used in a variety of applications where high quality
sound reinforcement is required in a lightweight package.
The TX1122 utilizes the DH3, a high output 1.25" titanium compres-
sion driver, coupled to a Constant Directivity™ 90° x 50° horn. This
combination results in a smooth response to 20 kHz and excellent
pattern control in short to medium throw applications.
The SMX2120 12" woofer has an FEA optimized magnet structure
for very low distortion and maximum intelligibility at high SPL levels.
The crossover uses steep 24 dB/octave slopes with equalization for
very smooth response in vocal range, extended HF, and a protection
circuit for long term reliability.
The TX1122 has a variety of features that make it equally suited for
portable or fixed installation applications. The trapezoidal enclo-
sure is constructed out of a combination of plywood and MDF, and
coated with EVCoat for maximum strength while still remaining
TM
lightweight. The unique grille design is very strong, dent resistant,
and features a rotatable logo. Four way handles allow for gripping
the TX1122 in a variety of positions, a pole mount allows for place-
ment on a subwoofer or a tripod. Six 3/8" threaded points allow a
single TX1122 to be suspended in a various positions. The recessed
input panel with dual NL4 connectors keeps the connectors hidden
while allowing the TX1122 to be used with the TX1181 subwoofer for
extended sub bass on a single amplifier channel, with no additional
processing needed.
TX1122
Single 12" Two-Way,
90° x 50° Full-Range
Loudspeaker System
Technical Specifications:
Freq. Response (-3 dB): 60 Hz - 20 kHz
1
Freq. Range (-10 dB): 45 Hz - 20 kHz
1
Rec. Hipass Frequency: 45 Hz
Axial Sensitivity: 97 dB (1W/1m)
Max. Calculated SPL: 130 dB
Horizontal Coverage: 90°
Vertical Coverage: 50°
Power Handling: 500W Continuous, 2000W Peak
LF Transducer: SMX2120, 12 in (305mm) Driver
HF Transducer: DH3, 1.25 in (32mm) Diaphragm
Crossover Frequency: 1750 Hz
Nominal Impedance: 8 Ohms
Minimum Impedance: 5.4 Ohms
Connectors: (2) Neutrik Speakon NL4's
Enclosure Material: Plywood and MDF with EVCoat
Grille: 16 GA Steel, Black Powdercoat, with
Suspension: (6) 3/8" Threaded Points - (2) on
Dimensions (H x W x D): 24.3" x 15.0" x 15.0"
Net Weight: 44.5 lbs (20.2 kg)
Shipping Weight: 50.0 lbs (22.7 kg)
Half Space Measurement.
1
Compression Driver
Rotatable Logo
Each Side and (2) on the Rear of
Enclosure
(616mm x 382mm x 380mm)
TM