Electro-Voice Tour X Series User Manual page 12

12 en | Installation
To rotate the horn:
1.
2.
3.
4.
5.
6.
03-2022 | 08 | F.01U.196.114
Remove the (6 or 8) screws that attach the grille to the enclosure.
Remove the (12) screws that attach the horn to the enclosure, and disconnect the wires
that attach the compression driver to the input panel.
Rotate the horn 90° to the desired vertical coverage pattern.
Reconnect the wires that attach the compression driver to the input panel.
The yellow wire corresponds to the positive terminal, and the yellow and black wire
corresponds to the negative terminal.
Reattach the horn to the enclosure using the (12) screws.
Reattach the grille using the (6 or 8) screws.
User manual
Tour X Series Loudspeakers
Electro-Voice