Installation Instructions; 30.1 General Installation Instructions - Siemens CS936G1.1 User Manual And Installation Instructions

Combi steam oven
Table of Contents

Advertisement

en Installation instructions
Recommended settings for steaming
Food
Peas, frozen, two con-
tainers
Broccoli, fresh, 300 g
Broccoli, fresh, one con-
tainer
1
The test is over when 85 °C is reached at the coldest spot (see IEC 60350-1).
2
Preheat the appliance.
3
A comparable degree of cooking between the reference sample and the main sample is achieved if the reference
sample is cooked for 5 minutes (produced as described in IEC 60350-1).
Grilling
Recommended settings for grilling
Food
Toasting bread
1
Do not preheat the appliance.
30  Installation instructions
Observe this information when installing the appliance.
 30.1 General installation instructions
Follow these instructions before you start with
the installation of the appliance.
¡ The safe operation of this appliance can
only be guaranteed if it has been installed
to a professional standard in accordance
with these installation instructions. The in-
staller shall be liable for damages incurred
as a result of incorrect installation.
¡ Check the appliance for damage after un-
packing it. Do not connect the appliance if
it has been damaged in transit.
¡ Before starting up the appliance, remove
any packaging material and adhesive film
from the cooking compartment and the
door.
¡ Proceed in accordance with the installation
sheets for installing accessories.
48
Accessory/cook-
Height
ware
x 2
3+2+1
Steam containers,
XL size
+
Universal pan
Steam containers,
2
XL size
Steam containers,
2
XL size
Accessory/cook-
Height
ware
Wire rack
3
Type of
Temperature in
heating
°C
→ Page 8
​ ⁠
100
2
​ ⁠
100
2
​ ⁠
100
Type of
Temperature in
heating
°C/grill setting
→ Page 8
1
​ ⁠
3
¡ Fitted units must be heat-resistant up to
95 °C, and adjacent unit fronts up to
70 °C.
¡ Do not install the appliance behind a decor-
ative door or the door of a kitchen unit.
There is a risk of overheating.
¡ Cut-out work on the units should be carried
out before installing the appliance. Remove
any shavings. Otherwise, the correct opera-
tion of electrical components may be ad-
versely affected.
¡ The mains socket for the appliance must
either be located in the hatched area ​ ⁠ or
outside of the area where the appliance is
installed.
Any unsecured units must be secured to
the wall using a standard bracket ​ ⁠ .
Steam in-
Cooking time
tensity
in mins
1
-
-
3
-
8-9
3
-
10-11
Steam in-
Cooking time
tensity
in mins
-
3-6

Advertisement

Table of Contents
loading

Table of Contents