Samsung WW9TA Series User Manual page 57

Code
HC
1C
8C
AC
AC6
DC1
0
If any information code keeps appearing on the screen, contact a local Samsung service
centre.
WW80TA026TT_04218B-03_EN(Indicative).indd 57
High temperature heating check.
• If the information code remains, contact a customer service
centre.
The Water Level sensor is not working properly.
•
Try power off and restarting the cycle.
•
If the information code remains, contact a customer service
centre.
•
When the "4C" message appears, the washer do draining for 3
minutes. During this time, the Power button is inoperative.
The MEMS sensor is not working properly.
•
Turn the machine off, and restart the cycle.
•
If the information code remains, contact a customer service
centre.
Check communications between main and sub PBAs.
•
Turn the machine off, and restart the cycle.
•
If the information code remains, contact a customer service
centre.
Check communications between main and inverter PBAs.
• Depending on the state, the machine may automatically returns
to normal operation.
•
Turn the machine off, and restart the cycle.
•
If the information code remains, contact a customer service
centre.
The Main Door lock/unlock is not working properly.
• Turn the machine off, and restart the cycle.
•
If the information code remains, contact a customer service
centre.
The machine does not turn off automatically after the last
spinning process, and the "0" message remains.
• The machine operates normally without running the DRUM
CLEAN cycle. However, it is recommended to run the cycle for
hygienic purposes.
Action
English 57
2021/2/27 11:32:27