Operations; Control Panel - Samsung WW9TA Series User Manual

Operations

Control panel

01 Cycle Selector
02 Display
03 Temp.
04 Rinse
05 Spin
06 Options
07 Bubble Soak
36 English
WW80TA026TT_04218B-03_EN(Indicative).indd 36
02
Turn the dial to select a cycle.
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
Press to change the water temperature for the current cycle.
Press to change the rinse count for the current cycle. You can set the
rinse count to a max of 5, depending on the cycle.
Press to change the spinning speed for the selected cycle.
• Rinse Hold (No indicator): The final rinse cycle is suspended so
that the laundry remains in the water. To unload the laundry, run
a drain or spin cycle.
• No Spin
: The drum does not spin after the final drain cycle.
• Spin Only
: To run the Spin Only cycle, press Spin for 3
seconds. When the cycle time and spinning speed appear, press
Spin repeatedly until a desired spinning speed is selected. Then,
press Start/Pause to start the cycle. The spinning time depends
on the selected cycle.
Press to select the options. Availability of the options depends on
the cycle.
Press to activate/deactivate the Bubble Soak function. This function
helps remove a wide variety of stubborn stains.
03
04 05
06
11
08
10
09
07
2021/2/27 11:32:22