Table of Contents
Advertisement
16
www.aeg.com
Mode H6 On
1) The hob detects the boiling process and acti‐
vates fan speed in accordance with automatic
mode.
2) The hob detects the frying process and acti‐
vates fan speed in accordance with automatic
mode.
3) This mode activates the fan and the light and
does not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Touch
comes on and goes off.
3. Touch
comes on.
4. Touch
on.
5. Touch
automatic mode.
To operate the hood directly
on the hood panel deactivate
the automatic mode of the
function.
When you finish cooking and
deactivate the hob, the hood
fan may still operate for a
certain period of time. After
that time the system
deactivates the fan
automatically and prevents
you from accidental
activation of the fan for the
next 30 seconds.
Operating the fan speed manually
You can also operate the function
manually. To do that touch
hob is active. This deactivates automatic
operation of the function and allows you
to change the fan speed manually. When
you press
one. When you reach an intensive level
Auto‐
Boil‐
matic
1)
ing
light
Fan
speed 2
for 3 seconds. The display
for 3 seconds until
a few times until
of the Timer to select an
when the
you raise the fan speed by
and press
to 0 which deactivates the hood fan. To
2)
Frying
start the fan again with fan speed 1 touch
.
Fan
speed 3
Activating the light
You can set the hob to activate the light
automatically whenever you activate the
hob. To do so set the automatic mode to
H1 – H6.
6.15 Power management
function
or
• Cooking zones are grouped according
to the location and number of phases
comes
in the hob. See the illustration.
• Each phase has a maximum
electricity load.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity load of the cooking zones
connected to a single phase is
exceeded.
• The function reduces the power of the
other cooking zones connected to the
same phase.
• The heat setting display of the
reduced zones changes between two
levels.
again you will set fan speed
To activate automatic
operation of the function,
deactivate the hob and
activate it again.
The light on the hood
deactivates 2 minutes after
deactivating the hob.
Advertisement
Table of Contents
