Intended Use; Legal Regulations And Directives; Purpose; Area Of Application - Dimplex LIA 0608HWCF M Installation And Operating Instruction

English

1.4 Intended use

This device is only intended for use as specified by the manu-
facturer. Any other use beyond that intended by the manufac-
turer is prohibited. This requires the user to abide by the rele-
vant project planning documents. Please refrain from
tampering with or altering the device.

1.5 Legal regulations and directives

This heat pump is designed for use in a domestic environment
according to Article 1, Paragraph 2 k) of EU directive 2006/42/
EC (Machinery Directive) and is thus subject to the require-
ments of EU directive 2014/35/EU (low-voltage directive). It is
thus also intended for use by non-professionals for heating
shops, offices and other similar working environments, agricul-
tural establishments and hotels, guest houses and other resi-
dential buildings.
The construction and design comply with all relevant EC direc-
tives and DIN/VDE regulations (see CE declaration of conform-
ity).
When connecting to the power supply, the relevant VDE, EN
and IEC standards must be observed. Any further connection
requirements stipulated by local utility companies must also be
observed.
When connecting the heating system, all applicable regulations
must also be adhered to. Furthermore, the regulations applica-
ble to the local drinking water supply must be observed when
connecting to the domestic hot water preparation.
This unit can be used by children aged 8 and over and by per-
sons with limited physical, sensory or mental aptitude or lack of
experience and/or knowledge, providing they are supervised or
have been instructed in safe use of the unit and understand the
associated potential dangers.
Children must not play with the device. Cleaning and user
maintenance must not be carried out by children without su-
pervision.
CAUTION!
When operating or maintaining a heat pump, the legal
requirements of the country where the heat pump is operated
apply. Depending on the refrigerant fill quantity, the heat
pump must be inspected for leaks at regular intervals by a
certified technician, and these inspections must be recorded.
EN-4
2

2.1 Area of application

The indoor unit constitutes the interface between a reversible
heat pump and the distribution system in the building. The in-
door unit contains all hydraulic components required between
heat generation and heat distribution with an unmixed heating
circuit.
Observe the operating limits according to the device informa-
tion.

2.2 General properties

Minimal installation effort due to ready-to-use integrated

components
 Ready for use, contains all essential components by way of
pumps, shut-offs, safety technology and heat pump man-
ager
 Integrated 200 l domestic hot water cylinder
Expansion vessel (12 l)

 The infinitely adjustable operation of the circulating pump
permits adjustment of the output according to need.
Optional immersion heater up to max. 6 kW

Switchable pipe heater (2/4/6 kW) for supplementary

heating and domestic hot water reheating
452172.66.01-EN · FD 0204
LIA 0608HWCF M - LIA 0911HWCF M

Purpose

www.glendimplex.de