Download Print this page

Installation Complete; Cleaning And Care; Service Parts; Contact And Warranty Information - Kohler EVOK 2.0 25163A-0 Installation Instructions

Seamless freestanding baths

Advertisement

CAUTION: Risk of property damage
• Ensure a watertight seal on the bath drain and plumbing.
• Install the faucet valve according to the faucet manufactuer's instructions.
• Do not install the faucet trim until instructed.
• Turn on the hot and cold water supplies and check connections for leaks.

CLEANING AND CARE

• Use a mild detergent such as liquid dishwashing soap and warm water to clean the bath. Do not use
abrasive cleaners that may scratch or dull the surface.
• Take care to read the label of cleaning products to ensure the cleaner is safe for use with acrylic material.
• Before using an intended cleaning product, test the cleaning solution on an inconspicuous surface.
• Do not allow cleaners to sit or soak into the surface of the bath.
• Wipe surfaces clean and rinse completely with water immediately after cleaner is applied.
• Use a soft dampened cloth or sponge. Never use an abrasive material such as a scouring pad to clean
bath surfaces.

SERVICE PARTS

IM
Product Code
1466888-*
1022879

CONTACT AND WARRANTY INFORMATION

For spare parts and warranty information, please visit our website:
New Zealand
www.kohler.co.nz
NEW ZEALAND
KOHLER NZ LTD
Ph: 0800 564 537
Fx: 0800 664 488

INSTALLATION COMPLETE

Descrip�on
Evok 2 Bath Drain kit
Bath foot kit
Australia
www.kohler.com.au
AUSTRALIA
KOHLER AUSTRALIA
Ph: 1 800 564 537
RMA
N
5

Advertisement

loading

This manual is also suitable for:

Evok 2.0 25164a-0Evok 2.0 25165a-0Evok 2.0 25166a-0Evok 2.0 25167a-0