Start-Up; Knx Ip Connection; Xlr Connection - Theben Training Case KNX Manual

6 Start-up


You will need a PC with a current ETS licence. This ETS licence is not
included in the training case.

6.1 KNX IP connection

The KNX IP connection is connected to the KNX IPsecure Router. The connection
can be used as follows:
 To connect a PC via Ethernet (IP tunneling) to the KNX IPsecure Router
(programming with the ETS via Ethernet possible).
 To connect several cases with each other via KNX IP (backbone = IP).
This allows crossline KNX communication between different cases
(simulating communication between different floors, for example).
The KNX IPsecure Router functions as a line coupler.

6.2 XLR connection

Further KNX devices can be connected to the XLR socket (BUS input).
Manual for the training case KNX
Start-up
28