Theben Training Case KNX Manual page 21

KNX devices used in the case
5.2.8 iON 104 KNX und iON 108 KNX
iON 104 KNX
https://www.theben.de/de/ion-104-knx-4969234
The tactile sensor iON 104 KNX can be used in residential buildings, meeting
rooms and offices, as well as in commercial buildings.
It has 4 buttons, which can be used to switch and dim the light, raise and lower
blinds, or trigger and save scenes. Furthermore, it is possible to measure the
temperature, control colours and display the status.
You can assign various functions to the individual buttons via the ETS
application, such as switching the light on/off and dimming; raising and
lowering blinds, triggering and saving scenes etc., and assign different colours
to the LEDs.
Raumcontroller iON 108 KNX
https://www.theben.de/de/ion-108-knx-4969238
The iON 108 KNX room controller with integrated temperature sensor can be
used in residential buildings, meeting rooms and offices, as well as in
commercial buildings. It is mounted on a standard junction box using the
supplied mounting plate. Combinations of two iON KNX are possible with a 2-
way mounting plate available as an accessory. The integrated bus coupling unit
makes installation and connection to the bus system quick and easy.
Manual for the training case KNX 21