Knx Devices Used In The Case; System Devices - Theben Training Case KNX Manual

5 KNX devices used in the case

The devices installed in the case are divided into system devices and terminal
devices.

5.1 System devices

5.1.1 KNX power supply PS 160 mA
https://www.theben.de/de/ps-160-ma-t-knx-9070956
 Power supply 160 mA with auxiliary voltage of 30 V DC
 Supply and monitoring of KNX system voltage
 This voltage supplies the bus coupling units via which each KNX device
communicates with the other networked KNX devices
5.1.2 KNX USB interface
https://www.theben.de/de/schnittstelle-usb-knx-9070397
 For communication between PC and KNX system to be programmed
 Support of KNX Data Secure communication
Manual for the training case KNX
KNX devices used in the case
15