Theben Training Case KNX Manual page 19

 Manual start-up and operation of the switch actuators is also possible
without the removable KNX bus module
 Manual operation on the device (even without bus voltage)
5.2.5 HME 6 T KNX
https://www.theben.de/de/hme-6-t-knx-4930245
 The 6-way heating actuator (extension module) of the MIX2 series
controls electronic actuators for heaters or cooling surfaces
 With 6 temperature controllers (P/PI) for heating and cooling
 For extension to up to 18 channels
 With the modes: comfort, standby, night as well as frost/heating
protection
 Up to 2 MIX or MIX2 extension modules can be connected to a base
module
 Device and KNX bus module can be exchanged independently of each
other
 Removable KNX bus module allows devices to be exchanged without
reprogramming
 Manual start-up and operation of the actuators are also possible without
KNX bus module
 LED switching status indicator for each channel
 Manual operation on the device (even without bus voltage)
Manual for the training case KNX
KNX devices used in the case
19