Theben Training Case KNX Manual page 22

The iON 108 KNX room controller has 20 functions, an LC display and a BLE
module for operation with the iONplay app via smartphone or tablet. It can be
used to switch and dim lights, raise and lower blinds, trigger and save scenes,
regulate temperature, control colours and display the status. The room
controller also supports heating and cooling operating modes, as well as the
control of the fan stages.
You can select a suitable icon from a library for each of the 20 functions on the
ION 108 KNX room controller. The icon is supplemented by individual function
names (for example "ceiling spots" or "terrace blinds") and the current status
(on/off/dimming value/position). This makes the room controller easier to use
and navigate. The brightness of the LC display adjusts itself depending on the
surrounding brightness. If it is dark in the room, the display lighting is dimmed
down to prevent disturbing light effects. During the day, the display shines
brighter and thus remains optimally readable.
The iON 108 KNX room controller is a multi-touch sensor with 4 buttons
(up/down/right/left).
Manual for the training case KNX
KNX devices used in the case
Active function (icon)
with value/status
Previous/next
function
Operation
22