Theben Training Case KNX Manual page 12

The KNX bus system
 Downloading the application programmes from the ETS to the KNX
devices.
In addition to the configuration and commissioning tools, the ETS also contains
extensive programme components for diagnosis and troubleshooting.
4.5.2 Structure of the ETS
The ETS is a software created according to Windows design rules. The ETS has
different work windows (main work window, group address window, topology
window) displaying the KNX installation to be edited in different ways.
4.5.3 Configuration
After installing the ETS on the computer, a system cannot yet be configured.
First of all, the manufacturer's product data have to be loaded into the ETS. The
manufacturers of KNX products provide these data free of charge. They are
available either directly from the manufacturer or on the internet. Alternatively,
the ETS online catalogue can be used. After importing these data into the ETS,
the actual configuration can begin.
Manual for the training case KNX 12