Symbol LS 5700 Product Reference Manual page 27

Set Up
Host Port. A 6-pin modular connector. Plug the
Synapse Adapter cable, or Synapse Power
Regulator cable into this port.
Hand-Held Laser Scanner Port. A 6-pin modular
connector. Plug a Symbol Synapse-compatible
scanner such as the LS 4004, LS 3603MX, or
LS 3203ER into this port. This scanner can be used
to program the LS 5700/LS 5800, and adapts itself
to the LS 5700/ LS 5800 decode parameters (i.e.,
code types, lengths and check digits). A separate
AC adapter may be necessary when using a hand-
held scanner. Current draw on this port should not
exceed 200 mA.
RS-232C Port. A 10-pin modular connector. This
input/output port is used to connect the scanner to
an RS-232C host. It is also used as an auxiliary port
to connect serial devices such as a scale, magstripe
reader, etc. Current draw on this port should not
exceed 200 mA.
2-3