Going Home; By Previous Destination - Clarion MAX973HD Owner's Manual

Searching Your Destination from the Destination Menu

Going Home

When your home address is registered, you can
start route guidance to your home by a simple
operation.
Note:
When your home address is not registered, register
it by touching the [Home (Add New)] key. When the
list of searching methods appears, register your
home address by the desired method. You can also
register your home from the [Stored Data] of the
Setting menu. ➜ "Home Location" (P. 49)
1. Touch the [Home] key.
2. Touch the [Start] key.
The route to your home is automatically
calculated and the route guidance is started.

By Previous Destination

The destinations previously used are registered
in the previous destination list (up to 100
locations). You can enter a destination by
selecting it from this list. When the previous
destination list exceeds 100 items, the oldest
entries are automatically deleted.
1. Touch the [ ] (Next) key.
2. Touch the [Previous Destinations] key.
3. From the displayed previous destination list,
touch the place you wish to go.
4. Touch the [OK] key.
5. Touch the [Start] key.
By Previous Starting Point
You can set the last start location as the
destination. In case you want to set a return route
from the reached destination, you can enter the
new destination quickly using this method.
1. Touch the [ ] (Next) key.
2. Touch the [Previous Starting Point] key.
3. Confirm the location of the destination, then
touch the [OK] key.
4. Touch the [Start] key.
24
MAX973HD
By Postal Code
You can search for destinations by entering the
country name and the postal code of the place
you wish to go to.
Note:
• In some countries or districts, it may be hard to
search specific places. In such cases, use postal
code search as a subsidiary function of searching
addresses.
1. Touch the [ ] (Next) key.
2. Touch the [Postcode] key.
3. Touch the [Country] key, and touch the
desired country name.
4. Touch the [Postcode] key.
The postal code input screen is displayed.
5. Enter the postal code by touching number
keys on the screen.
6. Touch the [OK] key.
For the rest of the procedure, read the
sections that apply to the country of your
residence.
●When the [Country] is set to the United
Kingdom or the Netherlands
1. Touch the [Pinpoint Search] key.
[Area Search]
Displays the City name list that corresponds
to the input postal code. Search a place by the
same way of searching by address.
2. Confirm the location of the destination, then
touch the [OK] key.
If a different place from where you wish to go
to is displayed, touch the [Back] key to return
to the previous screen, then perform the
procedure of "When the [Country] is set to an
other than the United Kingdom and the
Netherlands" listed below.
3. Touch the [Start] key.
●When the [Country] is set to an other than
the United Kingdom and the Netherlands
1. Touch the [Area Search] key.
2. Touch the desired City name to select.
The Address input screen is displayed.
3. If required, enter the Street name and House
No., then touch the [OK] key.
4. Touch the [Start] key.