Route To Home Address; Select The Destination - Clarion NP400 Owner's Manual

Display menu, jump to main menu
Display map in 3D view
Select current panned
panning map.
Information about current location on the
map, mode items
Select (check) currently highlighted item
Display spell mode
Page up, page down in displayed list
Step up or step down on menu list
Voice instractions are activated
Reset button
Cancel button
Delete button (Move cell content to Trash
can)

Route to home address

1. Touch the Home Address button on the screen. If the
home address is not set previously, the following screen
will be displayed.
. Press the check key to display home address set up
screen.
position, after
3. Select one of the option on the screen to set the
4. If the home address was saved previously, the screen

Select the destination

To select the destination press Go To... button on Main
Menu screen. The Go To... screen is displayed.
To start your navigation use one of these modes:
Address or Intersection, Point of Interest,
Favorites, History.
address. Once the address is set, it will be saved in the
software memory.
with address will pop up, after you touched the Home
Address button. Start your route.
NP400 9