Preset Scan; Displaying Radio Text - Clarion MAX973HD Owner's Manual

Radio Operations
● Assigning an image to Preset stations
You can assign your desired image data for each
preset station, which is displayed on the
information pane of the Tuner mode screen.
1. Touch the [List/Edit] key to display the Preset
list screen.
• You can select the desired band by
touching the [Band] key.
2. Touch the [ ] icon displayed on the desired
Preset key you wish to assign an image.
3. Touch the [Image] key.
4. Touch the desired image key you wish to
assign to the selected preset station.
5. Touch the [Back] key to return to the previous
screen.

Preset scan

The Preset Scan receives the stations stored in
the preset memory in order. This function is
useful when searching for the desired station in
memory.
1. Touch the [List/Edit] key.
2. Touch the [PS] key to start the Preset Scan.
The unit starts scanning each station for 7
seconds sequentially.
3. When the desired station is tuned in, touch the
[PS] key again to continue receiving that
station.
Auto store
The Auto Store is a function for storing up to 6
stations that are automatically tuned in
sequentially. If 6 receivable stations cannot be
received, a previously stored station remains
unoverwritten at the memory position.
1. Select the desired band by touching the
[Band] key.
2. Touch the [List/Edit] key.
3. Touch and hold the [AS] key for more than 2
seconds.
A beep sounds and the stations with good
reception are stored automatically to the
preset channels.
Even if you select FM1 or FM2, the received
stations are stored into the memory for AS.

Displaying radio text

When the station receiving broadcasts text data,
you can display the data on the screen.
1. Touch the [Disp] key on the Tuner mode
screen.
The received radio text is displayed on the
screen.
22
MAX973HD
TA (Traffic Announcement)
function
In the TA standby mode, when a traffic
announcement broadcast starts, the traffic
announcement broadcast is received as top
priority regardless of the function mode, so you
can listen to it. The Traffic Programme (TP)
automatic tuning is also available.
Setting TA standby mode
1. Press the [ INFO] button, touch the [TA] key,
and then touch the [Back] key.
"TA" will be displayed at the bottom of the
screen, and the system will automatically
search for a TP station (TP SEEK). When an
RDS broadcast station with traffic
announcement programmes is received, "TP"
will be displayed at the bottom of the screen.
Note:
• If no TP station is received, this system continues
the search operation. Performing the above
procedure again makes the "TA" go off, and stops
TP station searching.
● When a Traffic Announcement
broadcast starts
"TA" indication displayed at the bottom of the
screen will blink If you touch the [TA] key while a
Traffic Announcement broadcast is being
received, the Traffic Announcement broadcast
reception is cancelled, and the system goes into
the TA standby mode.
Cancelling TA standby mode
1. When "TA" is displayed on the screen, press
the [ INFO] button, touch the [TA] key, and
then touch the [Back] key.
"TA" on the screen goes off, and the TA
standby mode is cancelled.
Auto store function for TP stations
You can automatically store up to 6 TP stations
into the preset memory. If the number of TP that
can be received is less than 6, the broadcast
stations already stored in memory are left without
being overwritten.
1. When "TA" is displayed on the screen, touch
the [List/Edit] key.
2. Touch and hold the [AS] key for more than 2
seconds.
The TP stations with a good reception
condition are stored into the preset memory.
• Even if you select FM1 or FM2, TP stations
are stored into the memory for AS.