Setting Safety Camera - Clarion MAX973HD Owner's Manual

Setting Safety Camera

From the Safety Camera menu, you can set the Safety Camera.
1. Touch the [ ] (Next) key from the Setting menu.
2. Touch the [Safety Camera] key to display the Safety Camera menu.
3. Touch the desired menu item to set.
"Show Icon on Map":
Turns ON/OFF the Safety Camera Icon display on the map.
"Warning & Sound":
Turns ON/OFF both of the warning indication and alarm sound when the vehicle gets near a Safety
Camera location.
"Camera Location":
Touch the [List] key to display the list of the Safety Camera locations. Touching an item of the list
displays the icon at the location of the Safety Camera on the right map.
Note:
These settings are enabled when the Safety Camera data is stored in the hard disk. ➜ "Safety Camera" (P. 51)
53
MAX973HD