Replacing The Fuse - Clarion MAX973HD Owner's Manual

Wire Connection
Example of relay usage
Use a special installation kit (relay lead kit), sold separately, prepared specifically for your model. For
applicable models, consult the dealer where you purchased this unit.
Note:
• When connecting the main power supply lead (yellow) of the main unit, connect it to a spare terminal of this
unit.
(Yellow)
Ground lead from this unit

Replacing the fuse

If the fuse should blow, check to see if the wiring is correct. If a fuse is blown, replace it with a new one
of the same amperage rating as the original (10A FUSE).
To replace the fuse, remove the old fuse of the power supply lead and insert the new one.
Note:
• There are various types of fuse holder. Do not let the battery side touch other metal parts.
• After the connection, fix the lead by a clamp or insulation tape for protection.
Fuse holder
90
MAX973HD
Vehicle coupler
(Yellow)
To main unit
Tighten with the vehicle side screw and fasten
securely to the vehicle metal part.
CAUTION
Fuse
(10A FUSE)
Relay lead (Sold separately)
Conforms to EIAJ standard (CP2501)