Clarion MAX973HD Owner's Manual page 39

Displaying the Traffic Information
Displaying traffic information
on the registered user
location
1. Touch the [User Locations] key.
The User Locations list and the map around
the User Location is displayed.
2. Touch the desired User Location.
The map moves, and you can identify the
TMC event by the TMC traffic information
symbol.
You can edit/register a User Location by
touching the desired list item.
[(User Location name)]
The Edit User Location screen is displayed.
You can edit a registered User Location.
• [Rename]: Changes the User Location
name.
• [Delete]: Deletes the User Location.
• [OK]: Terminates the editing, then returns to
the previous screen.
• [ ]: Changes the location of the User
Location by scrolling the map.
[None (Add New)]
You can register a new User Location by the
procedures similar to entering the destination.
40
MAX973HD
Setting TMC traffic
information
1. Touch the [TMC Traffic Info Settings] key.
The TMC Traffic Info Settings menu screen is
displayed.
2. Touch the desired key on the screen to set it.
"Traffic Info on Map"
Switches ON and OFF the TMC traffic
information display on the map. The factory
setting is ON.
"Traffic Info Selection"
Switches ON and OFF the event information
icon display for each event type. The factory
settings are all ON.
You can set this for the following types of TMC
traffic information event symbols:
[All Traffic Information], [Accident &
Incident], [Traffic Status], [Roadworks],
[Closure & Restrictions], [Weather & Road
Info], [Information], [Traffic Forecast],
[Weather]
"Select TMC Provider"
You can select the TMC provider you want to
use.
• [Automatic]: Uses the provider
automatically selected.
• [Manual]: Uses the provider you select from
the list of providers.
Note:
For the TMC provider setting, we recommend to set
to [Automatic].
Setting TA (Traffic
Announcement) mode
1. Touch the [TA] key.
"TA" will be displayed at the bottom of the
screen, and the system enters the TA standby
mode. For the detailed information on the TA
standby mode, see "Radio Operations"
(Audio Manual).