Roland TurboStart VS-880 Supplemental Notes page 20

NQPSMTR
TR-808
TR-909
U-20
U-110
U-220
VG-8
VK-7
VK-1000
VP-70
VS-880
VT-1
W-30
W-50
XP-10
XP-50
XP-80
© 1997 Roland Corporation U.S.
No ROM reset.
Power on while holding TRACK #1 and PATTERN #1 .
No ROM reset.
Power on while holding PART and EDIT.
No ROM reset.
Power on while holding F1, F3, and F5. Press F6 for All, F4 for Patches, or F2 for System.
Power on while holding MAIN, SUB and PEDAL in the HARMONIC BAR PART section.
Press WRITE, then press F3 to access the INIT MENU screen. Press F4 to access the
COLD BOOT screen, then press ENTER.
Power on while holding PLAY, VOICE EXPANSION, and MIDI.
No ROM reset.
Power on while holding down the PRESET/USER button.
No ROM reset.
Press CONTROL and MASTER simultaneously. Use PARAMETER UP (^) and DOWN
(v) to select ALL. Press VALUE UP (^).
Press UTILITY. Use VALUE + and - to select INITIALIZE, then press ENTER. Use
VALUE + and - to select FACTORY PRESET, then press ENTER.
Press DISK/UTILITY, select SOUND, select PRESET, then press ENTER. Use the dial to
turn Memory Protect OFF if necessary, then press ENTER twice.
Press UTILITY, press F6 (MENU) twice to select Factory, then ENTER. Press F6
(EXECUTE). Use the dial to turn Memory Protect OFF if necessary, press ENTER, then
press F6 (EXECUTE).
Re-initialization Procedures
Supplemental Notes
Page 9 of 9