Opening The Operation Panel And Adjusting The Angle - Clarion MAX983HD Owner's Manual

Opening the Operation Panel and Adjusting the Angle

Open the operation panel when setting/ejecting a disc or SD card.
The angle of the operation panel can be adjusted depending on the mounting angle of the unit or light
coming into the car.
CAUTION
• Do not move the operation panel forcibly or
do not apply strong force to the operation
panel.
• When the operation panel is operating, be
careful not to get your hand or finger caught
between the operation panel and main unit
or its mechanical parts.
• The driver should not operate the operation
panel while driving.
Opening/closing the
operation panel
1. Press the [7 OPEN/CLOSE] button.
The operation panel will be opened or closed.
Note:
• The operation panel will close automatically when
leaving it open for a while.
• When the operation panel is open, the touch panel
cannot be operated.
Adjusting the angle of the
operation panel
The angle of the operation panel can be adjusted
in the range of 0° to 30°.
1. Keep pressing the [7 OPEN/CLOSE] button
more than 2 seconds.
Beeps will sound twice and the operation
panel will start moving.
2. When the operation panel is moved to your
desired angle, release the button.
The operation panel will stop.
* Once you adjust the angle of the operation
panel, the operation panel will return to the
adjusted angle even after it is open/closed.
Returning the operation panel
to the original angle
1. Keep pressing the [7 OPEN/CLOSE] button.
It will move, and stop at 30°.
2. Keep pressing the [7 OPEN/CLOSE] button
again.
It will move, and stop at 0°.
13
MAX983HD